imultaneous Interpreter Unit

TC-F06/16 Interpreter Console
-
Designed for 6 or 16-channel simultaneous interpretation system
-
Gooseneck microphone and headset microphone can be used
-
Built-in loudspeaker with volume level control
-
3.5mm jacks on both sides for MIC input and headphone/recording output
-
3 incoming languages can be preset, with pre-select A/B/C keys.
-
Automatic channel interlocking prevents interpreters from using same outgoing channel
-
Relay interpretation allows the interpreters to work from an active channel other than the floor
-
MUTE key to enable a brief muting of the microphone for cough cut
-
SLOW key to alert the current speaker to speak slowly
-
Loudspeaker is automatically switched off when microphone is turned on
-
The floor signal automatically switches to output channel after microphone is turned off
-
Multiple interpreter consoles can be connected in a daisy-chain
-
Frequency response: 50-18kHz
-
Distortion at 1 kHz: < 0.1%
-
Channel separation: > 85 dB
-
Signal-to-noise ratio: > 90 dB
-
Max. input power level: 7.5V
-
Operating voltage: 24V
-
Power consumption: 2.5W
|
- 8Ω/2W built-in loudspeaker
- Operating temperature: 0℃-50℃
- Standard mic stem length: 425 mm
- 128x64 backlit LCD screen
- 3/5/10m cable with DB25 connectors
- 3.5mm jacks for mic, earphone, recorder
- ABS base: 247 X 145 X 95mm
|
TC-D2 Interpreter Headset

- Closed-ear headset w/ microphone & vol control
- Connectors: 3.5mm stereo plugs
- Impedance: 60Ω±15%
- Frequency response: 20Hz to 20KHz
- Input power: 30-50mW
- Sensitivity: -58±2dB SPL/1mW
- Microphone type: Omni-directional dynamic
- Microphone sensitivity (1 kHz): -58±2dB
- Cord length: 2 meters
imultaneous Interpreter Unit

TC-F06/16 Interpreter Console
-
Designed for 6 or 16-channel simultaneous interpretation system
-
Gooseneck microphone and headset microphone can be used
-
Built-in loudspeaker with volume level control
-
3.5mm jacks on both sides for MIC input and headphone/recording output
-
3 incoming languages can be preset, with pre-select A/B/C keys.
-
Automatic channel interlocking prevents interpreters from using same outgoing channel
-
Relay interpretation allows the interpreters to work from an active channel other than the floor
-
MUTE key to enable a brief muting of the microphone for cough cut
-
SLOW key to alert the current speaker to speak slowly
-
Loudspeaker is automatically switched off when microphone is turned on
-
The floor signal automatically switches to output channel after microphone is turned off
-
Multiple interpreter consoles can be connected in a daisy-chain
-
Frequency response: 50-18kHz
-
Distortion at 1 kHz: < 0.1%
-
Channel separation: > 85 dB
-
Signal-to-noise ratio: > 90 dB
-
Max. input power level: 7.5V
-
Operating voltage: 24V
-
Power consumption: 2.5W
|
- 8Ω/2W built-in loudspeaker
- Operating temperature: 0℃-50℃
- Standard mic stem length: 425 mm
- 128x64 backlit LCD screen
- 3/5/10m cable with DB25 connectors
- 3.5mm jacks for mic, earphone, recorder
- ABS base: 247 X 145 X 95mm
|
TC-D2 Interpreter Headset

- Closed-ear headset w/ microphone & vol control
- Connectors: 3.5mm stereo plugs
- Impedance: 60Ω±15%
- Frequency response: 20Hz to 20KHz
- Input power: 30-50mW
- Sensitivity: -58±2dB SPL/1mW
- Microphone type: Omni-directional dynamic
- Microphone sensitivity (1 kHz): -58±2dB
- Cord length: 2 meters